These are most of the specifications currently available for Amlogic S905X processor with highlights in bold:

• CPU Sub-system –  Quad core ARM Cortex-A53 CPU up to 1.5GHz (DVFS) with Neon and Crypto extensions

• 3D Graphics Processing Unit – Penta-core ARM Mali-450 GPU up to 750MHz+ (DVFS) with two geometry/vertex processors, three pixel processors supporting OpenGL ES 1.1/2.0 and OpenVG 1.1.

• 2.5D Graphics Processor – Fast bitblt engine with dual inputs and single output, programmable raster operations (ROP) and polyphase scaling filter, etc..

• Crypto Engine – AES/AES-XTS block cipher with 128/192/256 bits keys, DES/TDES block cipher, Hardware crypto key-ladder operation and DVB-CSA for transport stream encryption,  built-in hardware True Random Number Generator (TRNG), CRC and SHA-1/SHA-2/HMAC SHA engine

• Video/Picture CODEC

  • Amlogic Video Engine (AVE-10) with dedicated hardware decoders and encoders

  • Supports multiple “secured” video decoding sessions and simultaneous decoding and encoding

  • Video/Picture Decoding

    • VP9 Profile-2 up to 4Kx2K@60fps

    • H.265 HEVC MP-10@L5.1 up to 4Kx2K@60fps

    • H.264 AVC HP@L5.1 up to 4Kx2K@30fps, H.264 MVC up to 1080p @60fps

    • MPEG-4 ASP@L5 up to 1080P@60fps (ISO-14496)

    • WMV/VC-1 SP/MP/AP up to 1080P@60fps

    • AVS-P16(AVS+) /AVS-P2 JiZhun Profile up to 1080P@60fps

    • MPEG-2 MP/HL up to 1080P@60fps (ISO-13818)

    • MPEG-1 MP/HL up to 1080P@60fps (ISO-11172)

    • RealVideo 8/9/10 up to 1080P@60fps

    • WebM up to VGA

    • MJPEG and JPEG unlimited pixel resolution decoding (ISO/IEC-10918)

    • Supports JPEG thumbnail, scaling, rotation and transition effects

  • Video/Picture Encoding

    • Independent JPEG and H.264 encoder with configurable performance/bit-rate

    • JPEG image encoding

    • H.264 video encoding up to 1080P@60fps with low latency

• Video Post-Processing Engine – HDR10 & HLG HDR processing, REC709/BT2020 processing, motion adaptive 3D noise reduction filter, advanced motion adaptive edge enhancing de-interlacing engine, 3:2 pull-down support, deblocking filters, etc..

• Video Output

  • Built-in HDMI 2.0a transmitter including both controller and PHY with 3D, CEC, HDR and HDCP 2.2, 4Kx2K@60 max resolution output

  • CVBS 480i/576i standard definition output

• Camera Interface – 2x ITU 601/656 parallel video input with down-scalar, supports camera input as YUV422, RGB565,16bit RGB or JPEG

• Audio Decoder and Input/Output

  • Supports MP3, AAC, WMA, RM, FLAC, Ogg and programmable with 7.1/5.1 down-mixing

  • I2S audio interface supporting 8-channel (7.1) input and output

  • Built-in serial digital audio SPDIF/IEC958 output and PCM input/output

  • Built-in dual-channel audio DAC with amplifier

  • Dual-channel digital microphone PDM input

  • Supports concurrent dual audio stereo channel output with combination of I2S+PCM

• Memory and Storage Interface

  • 16/32-bit SDRAM memory interface running up to DDR2133

  • Supports up to 2GB DDR3/4, DDR3L, LPDDR2, LPDDR3 with dual ranks

  • Supports SLC/MLC/TLC NAND Flash with 60-bit ECC

  • SDSC/SDHC/SDXC card and SDIO interface with 1-bit and 4-bit data bus width supporting up to UHS-I SDR104

  • eMMC and MMC card interface with 1/4/8-bit data bus width fully supporting spec version 5.0 HS400

  • Supports serial 1, 2 or 4-bit NOR Flash via SPI interface

  • Built-in 4k bits One-Time-Programming memory for key storage (That must be where DRM / HDCP keys are programmed)

• Network

  • Integrated 10/100M PHY interface

  • Supports Energy Efficiency Ethernet (EEE) mode

• Integrated I/O Controllers and Interfaces

  • 2x USB 2.0 high-speed USB I/O, one USB Host and one USB OTG

  • Multiple UART, I2C and SPI interface with slave select

  • Multiple PWMs

  • Programmable IR remote input/output controllers

  • Built-in 10bit SAR ADC with 2 input channels

  • General Purpose IOs with built-in pull up and pull down

• System, Peripherals and Misc. Interfaces

  • Integrated general purpose timers, counters, DMA controllers

  • 24 MHz crystal input

  • Embedded debug interface using ICE/JTAG

• Power Management

  • Multiple external power domains controlled by PMIC, and internal ones controlled by software

  • Multiple sleep modes for CPU, system, DRAM, etc.

  • Multiple internal PLLs for DVFS operation

  • Multi-voltage I/O design for 1.8V and 3.3V

  • Power management auxiliary processor in a dedicated always-on (AO) power domain that can communicate with an external PMIC

• Security

  • Trustzone based Trusted Execution Environment (TEE)

  • Secured boot, encrypted OTP, encrypted DRAM with memory integrity checker, hardware key ladder and internal control buses and storage

  • Protected memory regions and electric fence data partition

  • Hardware based Trusted Video Path (TVP) , video watermarking and secured contents (requires SecureOS software)

  • Secured IO and secured clock

Subject to Manufacturer/Supplier Approval

Order Tanix-TX5Pro via:

E-Mail at: sales@STREAM-Evolution.co.za

Or

Phone: 072-204-8687